Prodcut Details
Model Name |
3D Black Carbon Fiber Film Twill Weave Vinyl Sheet Roll Wrap |
Model Number |
ZA4100 |
Finish |
3D Textured feel |
Thickness |
0.14-0.16mm |
Material |
PVC |
Stretch Rate |
33+Pascal |
Color |
Black,grey,red,bule etc. |
Paper |
140gsm |
Weight of Liner |
120gsm |
Film Style |
Air bubble free |
Glue |
30g/ square ± 2g/square(imported glue) |
Temperature |
-40 to 125 degree |
Compatibility |
Die cutting, car decoration, architectural decoration |
||
Application |
Car wrap,motorcycle,mobile photo decorationetc. |
Picture Show Of Car Vinyl Sticker
Application
Production & Packing
Instructions
1.Clean your work surface. Remove the vinyl's adhesive backing, then lay the vinyl on the surface.
2.Spray the exposed vinyl surface till wet, using a foaming glass cleaner in a spray bottle.
3.Smooth the surface with a credit card to remove any air bubbles. Work your way from the center of the surface going outwards.
4.Heat the vinyl with a heat gun set to low. You will notice that the vinyl will begin to stretch.
5.Pull the vinyl and wrap the area. Smooth it again with the credit card.
6.Trim the excess edges with a knife and remove any scrap pieces of vinyl. Smooth the edges down. Wet the vinyl again and then dry.